AllAmericanMade
Proudly  American Made
727-455-5576
STORE
Order Your VaraKit™ Today

Product Categories

Cart

Below are the most common pontoon hydrofoil configurations. These configurations are our most popular and easiest to install designs (this foil can be installed in 2 hours). Great for the DIY'r. While they produce slightly less lift than our larger kits, they do produce better fuel economy, better range and much better ride. Requires NO trailer modifications, and can be installed while on trailer. However, removal of any inside guides or interference of foil entry onto your storage support/s is still required as for any VaraFoil™ setup.

VaraKit™-3

$3,625.95

VaraKit™-4

$4,695.45

VaraKit™-4 (Plus 1)

$6,017.95

VaraKit™-4 (Strake)

$4,695.45

Below are the most common configurations for our original VaraFoil that produces higher lift, best fuel economy, best range, and highest ride, most robust design available.  However, our plug and play parts list makes it easy to configure over 5000 different combinations of VaraStruts™, VaraFoils™, and VaraPlates™.  Does require a window installed in trailer or lift that boat is stored on.  If your configuration is NOT shown or if you have questions, please contact our team of professionals today.

VaraKit™-1 (Angle Strake)

$3,200.45

This large foil, high lift kit can be used with any pontoon tubes that have angled strake or strakes welded on the inside,outside or both sides of toon bottoms. Your order form must include measurements to all of these accessory attachments so we may supply your best option.

VaraKit™-1 (Concave Strake)

$3,200.45

This large foil, high lift kit can be used with any pontoon tubes that have a keelson, curved strake or strakes welded on the inside, outside or both sides of toon bottoms. Your order form must include measurements to all of these accessory attachments so we may supply your best option.

VaraKit™-1 (Flat Strake)

$3,200.45

This large foil, high lift kit can be used with any pontoon tubes that have a strake or strakes welded on the inside,outside or both sides of toon bottoms.

VaraKit™-1 (Keel)

$3,200.45

This large foil, high lift kit can be used with any pontoon tubes that have a V shaped keelson welded down the length on the center of toon bottoms.

VaraKit™-1 (Keel2)

$3,200.45

This large foil, high lift kit can be used with any pontoon btubes that have a keelson, strake or strakes welded on the inside,outside or both sides of toon bottoms. Your order form must include measurements to all of these accessory attachments so we may supply your best option.

VaraKit™-2 (Keel OM)

$4,522.95

This fixed smaller foil, offers greater stability for higher speed vessels. This robust kit can be used with any pontoon tubes that have a V shaped keelson welded down the length on the center of toon bottoms. This kit is for the boaters that desire a bit more stability for the family while cruising at faster speeds. This kit is adaptable for Concave, Flat, Angled, or Custom Strakes also. Pricing is the same but please indicate when prompted of the changes for measurements needed.

VaraKit™-2 (Keel)

$4,522.95

This large foil, high lift extremely robust kit can be used with any pontoon tubes that have a V shaped keelson welded down the length on the center of toon bottoms. This kit is for the boaters that need a bit more muscle for bigger waves or beaching boat often as kit includes additional support. This kit is adaptable for Concave, Flat, Angled, or Custom Strakes also. Pricing is the same but please indicate when prompted of the changes for measurements needed.

VaraKit™-2 (Plus 1)

$5,845.45

This fixed foil kit is for boaters that have 8'6" or wider beams. Kit can be mounted to curved or flat strakes on either side of toons or to V shaped keelson welded down the length on the center of toon bottoms. Difference from above is that 3 Varastrut are provided as shown. Very robust design for beaching and large waves.

VaraKit™-2 (Plus 2)

$7,167.95

This is our most robust design fixed foil kit for boaters that have 8'6" or wider beams, heavier or faster boats. Kit can be mounted to curved, flat strakes,angled or custom strakes on either side of toons or to V shaped keelson welded down the length on the center of toon bottoms. Difference from above is that 4 Varastruts are provided as shown. Extremely robust for beaching and large waves.

VaraKit™-2 (Wide Mount)

$4,522.95

This fixed foil kit is for boaters that have 8'6" or wider beams. or to V shaped keelson welded down the length on the center of toon bottoms. This kit can be mounted to Concave, Flat, Angled, or Custom Strakes on either side of toons or to V shaped keelson welded down the length on the center of toon bottoms. also. Pricing is the same but please indicate when prompted of the changes for measurements needed. 2 Varastrut are provided as shown.

VaraKit™-4 (Ext Mount)

$4,695.45

Mount using outside Toon mounted supports for larger foil lifting area. Can be mounted with Keelsons, strakes or bare toons.

VaraKit™-4 (Wide Mount Plus)

$4,994.45

This fixed foil kit is for boaters that have 8'6" or wider beams.This large foil, high lift kit can be used with any "Bare" pontoon tubes w/o strakes and/or keelsons welded to toon bottom or sides. This kit is easy install 2-3 hrs but basic trailer window mods will be needed.

VaraKit™-4 (Wide Mount)

$4,994.45

This large foil, high lift kit can be used with any "Bare" pontoon tubes w/o strakes and/or keelsons welded to toon bottom or sides. This kit is easy install 2-3 hrs but basic trailer window mod will be needed.

menu-circlecross-circle